Микросхема TLC372CP

TLC372CPThe TLC372CP is a dual general purpose LinCMOS™ Differential Comparator fabricated using LinCMOS™ technology. It is designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 2 to 18V. It features extremely high input impedance, allowing direct interfacing with high-impedance sources. The outputs are N-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships. The TLC372 has internal electrostatic discharge protection circuits and has been classified with a 1000V ESD rating using human body model testing. However, care should be exercised in handling this device as exposure to ESD may result in a degradation of the device parametric performance. The TLC372C is characterized for operation from 0 to 70°C.

• 200ns Fast response time for TTL-level input step
• Built-in ESD protection
• 10¹²R High input impedance
• 5pA Extremely low input bias current
• Ultrastable low input offset voltage
• Input offset voltage change at worst-case input conditions typically 0.23µV/month
• Common-mode input voltage range includes ground
• Output compatible with TTL, MOS and CMOS
• Pin-compatible with LM393

Микросхемы / Усилители и компараторы / Компараторы
Корпус: 8-PDIP, инфо: Компаратор х2 t=200 нс